Operation Manual

When your clock radio is set to wake by the radio alarm, your clock radio

will switch to the last used DAB or FM radio station. If the radio cannot

connect to the radio station, the buzzer alarm will be used instead.

The alarm volume will start from minimum and increase in level every few

seconds. The alarm will sound for 60 minutes unless cancelled.

Note: If the radio is switched on because of the radio alarm you can control

basic functions such as the volume.

Cancelling alarms

1. While an alarm is sounding it can be cancelled by pressing the

On / Standby button.

To view the alarm settings

1. Ensure your clock radio is in standby mode. Press and release Alarm

1 or 2 buttons to enter the alarm setup.

2. Press and release the Select button to cycle through each of the

settings for the chosen alarm.

You may use the Tuning Up and Down buttons to modify any particular

setting if desired, using the Select button to enter the modiﬁ cation.

Standby