Operation Manual

6
Operating your CD radio cassette recorder - DAB
1. Fully extend the Telescopic aerial and then angle and rotate for best
reception.
2. Slide the Function switch to the Radio position to switch on your CD
radio cassette recorder.
3. Slide the Waveband switch to the DAB position The display will show
"DAB" and then " Now tuning" for a few seconds.
4. If this is the fi rst time the CD cassette recorder is used a quick scan of
UK Band III DAB channels may be carried out. If the CD radio cassette
recorder has been used before, the last used station will be selected.
If new radio stations are found, they will be added to the stored list of
stations.
5. When fi rst switched on, the fi rst station in the list of stations found will
be played. The display will show the station name in the fi rst line of
the display and other information in the second line.
6. If the station list is still empty after the scan operation your cd radio
cassette recorder will display "Service not available".
7. If no signals are found it may be necessary to relocate your CD radio
cassette recorder to a position giving better reception, and then repeat
the scan using the AutoScan facility (page 8).
2
3