DAB Digital Sound System With MP3 And Remote Control Owner's Manual

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Recalling a preset station (all wavebands)

1. Press the On/Off button [Standby button on front panel] to switch on

your sound system.

2. Select the required waveband by pressing the DAB or Band button

[Band/Source button on front panel].

3. Momentarily press the required Preset button (1-10), your radio will

tune to the station stored in preset memory.

Note: If you have not previously stored a preset station and the preset

button is pressed "Empty preset" will be displayed.

4. Stations stored in preset memories may be overwritten by following

the above procedure.

Presetting stations (using front panel)

1. Press and hold down the required preset button (1-5) on the front

panel.

2. To store presets 6 -10 press and release the +5 Preset button then

press and hold the required preset button. ie. Preset 1 will then be

used to store preset 6.