Stereo Sound System User Manual

Presetting stations

There are 10 memory presets on each of the DAB, MW and FM

wavebands.

1. Press the

On/Off button to switch on your radio.

2. Tune to the required station as previously described.

3. Press and hold down the required

Preset button (1 to 10) until the

display shows e.g. "Preset 1 stored". The station will be stored under

the chosen preset button. Repeat this procedure for the remaining

presets.

4. Stations stored in preset memories may be overwritten by following

Recalling a preset station

1. Press the On/Off button to switch on your radio.

2. Select the required waveband by pressing the

Radio button.

3. Momentarily press the required

Preset button (1-10), your radio will

tune to the station stored in preset memory.

Note: If you have not previously stored a preset station and the preset

button is pressed "Empty preset" will be displayed.