User manual

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Dynamic Range Control (DRC) settings

DRC can make quieter sounds easier to hear when your radio is used in

a noisy environment.

1. Press the On/Off button to switch on your radio.

2. Press and hold in the Advanced info button until display shows

“Station order.”

3. Rotate the Tuning/Record control until the display shows "DRC

value".

4. Press and release the Tuning/Record control to enter adjustment

mode.

5. Rotate the Tuning/Record control to select required DRC setting

(default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

6. Press and release the Tuning/Record control to conﬁ rm the setting.

The display will return to radio mode.

4,5