Ltd 3 Band Radio Cassette Recorder User Manual

Battery operation

IMPORTANT - The LR6 (AA size battery) must be fitted at all times to

provide power for the clock.

1. Remove the Battery cover on the rear of the unit by pushing the

catches in the direction of the arrow.

2. Insert one LR6 (AA size) battery into the small space in the battery

compartment. The clock display will now appear. The LR6 (AA size)

battery provides power for the clock and must remain fitted

at all times.

3. Insert four LR14 (C size) batteries into the remaining spaces in the

battery compartment. Take care to ensure all batteries are inserted

with the correct polarity as shown inside the battery compartment.

Replace the battery cover.

4. Reduced power, distortion, and a ‘stuttering’ sound are all signs that

the batteries may need replacing.

5. If your radio cassette is not to be used for any extended period of

time it is recommended that the batteries are removed from the radio.

We would recommend for economy, that the RC9907 is used on the

mains whenever possible with battery operation for occasional or

stand-by use only.

IMPORTANT: The batteries should not be exposed to excessive

heat such as sunshine, fire or the like. After use, disposable

batteries should if possible be taken to a suitable recycling centre.

On no account should batteries be disposed of by incineration.

Mains operation

1. Place your radio cassette on a flat surface.

2. Plug the mains lead into the Mains socket located on the rear of your

radio cassette ensuring that the plug is pushed fully into the socket.

3. Plug the other end into a wall socket and switch on. The Mains

indicator will light up indicating that the radio is connected to the

mains supply. The batteries will be automatically disconnected.

RC9907 Issue 3.pmd 1/26/2007, 1:35 PM4