MSDS

2
SECTION 6: Accidental Release Measures
Personal Precautions: Use protective gloves, goggles and suitable protective clothing.
Environmental Precautions: Do not allow product to get into drains, soil, or surface water.
Methods of Clean-up: Small spillages: Absorb with sand or other inert absorbent. Large spillages: Dam and absorb. Collect
spillage in containers, seal securely and deliver for disposal according to local regulations. Wear
necessary protective equipment.
SECTION 7: Handling and Storage
Handling Precautions: Provide good ventilation. Do not use in confined spaces without adequate ventilation and/or respirator.
Avoid contact with skin and eyes. Do not eat, drink or smoke when using the product.
Storage: Keep separate from food, feedstuffs, fertilizers and other sensitive material. Store in closed original
container at temperatures between 5°Cand 30°C/ 40°F and 86°F. Protect from freezing and direct sunlight.
SECTION 8: Exposure Control / Personal Protection
Exposure Guidelines: Not determined
Engineering Controls: Provide adequate ventilation.
Personal Protective Equipment:
Skin Protection - Permeation resistant gloves (butyl rubber, nitrile rubber, PVC or polyvinyl alcohol).
Eye/Face Protection - Glasses with side shields, chemical splash goggles and/or face shield.
Chemical Name / CAS No. OSHA Exposure Limits ACGIH Exposure Limits Other Exposure Limits
None
SECTION 9: Physical and Chemical Properties
Appearance: Milky white liquid dispersion
Odor: Very mild, non- offensive odor
Relative Density: 1.08
Odor Threshold: Not available
Solubility: Miscible in water
pH: 2.5-4
Partition Coefficient: n-octanol/water; Not determined
Melting Point: Not determined
Freezing Point: Not determined
Auto-ignition Temperature: Not determined
Flash Point: Non- flammable > 204 C (400 F) Cleveland Closed Cup
Decomposition Temperature: Not determined
Evaporation Rate: Not determined
Viscosity: Not determined
Flammability (Solid/Gas): Not applicable
Upper/Lower Flammability: Not determined
VOC Content: <1 g/L
Vapor Pressure: Not Determined
Boiling Point: 100°C/ 212°F
SECTION 10: Stability and Reactivity
Chemical Stability: Stable under normal temperature conditions and recommended use.
Conditions to Avoid: Excessive heat, direct sunlight and/or frost.
Materials to Avoid: Water, amines, strong bases, and alcohols.