Use and Care Manual

1
Safety Data Sheet
Revision Date: 8/10/2018
SECTION 1: Identification and Company Details
Product Name: 1406 Tongue & Groove Adhesive
Product Code: 1406
Manufacturer/ Supplier: Roberts Consolidated Industries, Inc.
Address: 300 Cross Plains Blvd.
Dalton, GA 30721
Emergency Phone: (800) 424-9300 (24-hour Response / CHEMTREC)
Product Information: (706) 277-5294
Recommended Use: Adhesive
SECTION 2: Hazard(s) Identification
Classification of the
substance or mixture: This product is not classified as hazardous under GHS criteria.
SECTION 3: Composition / Information on IngredientThere are no ingredients present which, within the current knowledge of
the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment, are PBTs, vPvBs or substances of equivalent
concern, or have been assigned a workplace exposure limit and hence require reporting in this section.
Occupational exposure limits, if available, are listed in Section 8
SECTION 4: First-Aid Measures
Inhalation: Move victim to fresh air. Consult physician if necessary.
Skin Contact: Wash with soap and water. Remove contaminated clothing. Consult physician if necessary.
Eye Contact: Flush with copious amounts of water for at least 15 minutes. Consult physician if necessary.
Ingestion: Do not induce vomiting. Wash mouth with water. Consult physician.
Note to Physician: Eyes: Stain for evidence of corneal injury. If cornea is burned, instill antibiotic steroid preparation. Skin:
This compound is a known skin sensitizer. Treat symptomatically as for contact dermatitis or thermal burns.
If burned, treat as thermal burn. Ingestion: Treat symptomatically. There is no specific antidote. Inducing
vomiting is contraindicated because of the irritating nature of this compound. Respiratory: Treatment is
essentially symptomatic. Remove individual with symptoms from exposure and assist in breathing if
necessary.
SECTION 5: Fire-Fighting Measures
Extinguishing Media: This product is not flammable. Use fire- extinguishing media appropriate for surrounding materials.
Hazardous Combustion Products: No particular hazards known.
Protection of Firefighters: Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
SECTION 6: Accidental Release Measures
Personal Precautions: Use protective gloves, goggles and suitable protective clothing.
Environmental Precautions: Do not allow product to get into drains, soil, or surface water.
Methods of Clean-up: Small spillages: Absorb with sand or other inert absorbent. Large spillages: Dam and absorb. Collect
spillage in containers, seal securely and deliver for disposal according to local regulations. Wear
necessary protective equipment.
SECTION 7: Handling and Storage
Handling Precautions: Provide good ventilation. Do not use in confined spaces without adequate ventilation and/or respirator.

Summary of content (4 pages)