Specification

ManualsBrandsRoberts ManualsKitchen10 oz. Cartridge Tube of Rapid Repair Wood Flooring Adhesive

Safety Data Sheet

Revision Date: 04/28/2017

SECTION 1: Identification and Company Details

Product Name: 1407 Engineered Wood Flooring Adhesive

Product Code: 1407

Manufacturer/ Supplier: Roberts Consolidated Industries, Inc.

Address: 300 Cross Plains Blvd.

Dalton, GA 30721

Emergency Phone: (800) 424-9300 (24-hour Response / CHEMTREC)

Product Information: (706) 277-5294

Recommended Use: Adhesive

SECTION 2: Hazard(s) Identification

Classification of the

substance or mixture: This product is not classified as hazardous under GHS criteria.

SECTION 3: Composition / Information on Ingredient

Weight % CAS #

Marble Dust 34% 1317-65-3

Naphthenic Oil 10% 64742-52-5

This product is an encapsulated mixture which reduces the likelihood of exposure to hazardous particulates. Airborne exposures to

hazardous dusts or mists may be generated by spraying, sanding or grinding. During normal usage of the product as recommended,

airborne dusts will not be present

SECTION 4: First-Aid Measures

Inhalation: Move victim to fresh air. Consult physician if necessary.

Skin Contact: Wash with soap and water. Remove contaminated clothing. Consult physician if necessary.

Eye Contact: Flush with copious amounts of water for at least 15 minutes. Consult physician if necessary.

Ingestion: Do not induce vomiting. Wash mouth with water. Consult physician.

Note to Physician: Eyes: Stain for evidence of corneal injury. If cornea is burned, instill antibiotic steroid preparation. Skin:

Treat symptomatically as for contact dermatitis or thermal burns. If burned, treat as thermal burn. Ingestion:

Treat symptomatically. There is no specific antidote. Inducing vomiting is contraindicated because of the

irritating nature of this compound. Respiratory: Treatment is essentially symptomatic. Remove individual with

symptoms from exposure and assist in breathing if necessary.

SECTION 5: Fire-Fighting Measures

Extinguishing Media: This product is not flammable. Use fire- extinguishing media appropriate for surrounding materials.

Hazardous Combustion Products: No particular hazards known.

Protection of Firefighters: Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.

SECTION 6: Accidental Release Measures

Personal Precautions: Use protective gloves, goggles and suitable protective clothing.

Environmental Precautions: Do not allow product to get into drains, soil, or surface water.

Methods of Clean-up: Small spillages: Absorb with sand or other inert absorbent. Large spillages: Dam and absorb.

Collect spillage in containers, seal securely and deliver for disposal according to local regulations. Wear

necessary protective equipment.

Summary of content (4 pages)

PAGE 1
Safety Data Sheet Revision Date: 04/28/2017 SECTION 1: Identification and Company Details Product Name: Product Code: Manufacturer/ Supplier: Address: Emergency Phone: Product Information: Recommended Use: SECTION 2: Hazard(s) Identification Classification of the substance or mixture: SECTION 3: Marble Dust Naphthenic Oil 1407 Engineered Wood Flooring Adhesive 1407 Roberts Consolidated Industries, Inc. 300 Cross Plains Blvd.
PAGE 2
SECTION 7: Handling and Storage Handling Precautions: Storage: SECTION 8: Provide good ventilation. Do not use in confined spaces without adequate ventilation and/or respirator. Avoid contact with skin and eyes. Do not eat, drink or smoke when using the product. Keep separate from food, feedstuffs, fertilizers and other sensitive material. Store in closed original container at temperatures between 5°Cand 30°C/ 40°F and 86°F. Protect from freezing and direct sunlight.
PAGE 3
SECTION 12: Ecological Information Mobility and Bioaccumulation Potential: Not determined Degradation: Not determined Aquatic Toxicity: Not determined LC50 – 24 hour (Static): Not determined Component Ecotoxicity: Naphthenic Oil 96 Hr LC50 Oncorhynchus mykiss: >5000 mg/L 48 Hr EC50 Daphnia magna: >1000 mg/L SECTION 13: Disposal Considerations Disposal: Wastes or Residues: SECTION 14: Transport Information Road: DOT Proper Shipping Name: Non-Regulated DOT Packing Group: N/A DOT Label: N/A UN Number: N
PAGE 4
NJ RTK 1317-65-3 Marble Dust Pennsylvania RTK 1317-65-3 Marble Dust SARA 302 Extremely Hazardous Substances – None Massachusetts RTK 1317-65-3 Marble Dust EPA Hazard Classifications: Acute Chronic Fire Pressure Reactive Hazard Hazard Hazard Hazard Hazard S No No No No No e c Section 313 requires submission of annual reports of release of toxic chemicals that appear in 40 CFR 372 (for SARA 313). This information must be included in all SDSs that are distributed for this material.