Installation Guide

3095
Carpet Adhesive
1. PRODUCT NAME
Roberts
®
3095 Carpet Adhesive
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
Roberts 3095 is a premium commercial-grade carpet adhesive developed for
the most demanding carpet installations, including broadloom carpet. This
high solids latex-based adhesive is fast grabbing and produces great bond and
shear strengths. Roberts 3095 is an excellent adhesive for direct or double
bond installation methods.
Features and Benefits
• Moisture Control Adhesive –
Up to 10 lbs. MVER (ASTM F1869) / 90% RH (ASTM F2170)
• High tack and fast grab
• Extra heavy foot traffic areas
• Direct and double bond installations
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC < 1 g/L,
SCAQMD Rule 1168
• Non-flammable. NFPA Class A and UBC Class 1 fire resistance
ratings (ASTM E84)
• CRI Green Label Plus
®
Certified – GLP #36471
• GoldGuard
®
antimicrobial product protection
• Traffic – Heavy Commercial
Uses
For the interior installation of carpet.
Carpet Backings – Polypropylene (ActionBac
®
), woven, Axminster, Wilton,
hot melt, unitary, needle-punch (non-woven/needle-bond), urethane foam
(Enhancer
™
), polyurethane laminate (LifeSpan
®
), sponge-rubber, jute, and
latex-foam. Do not use this adhesive for pure vinyl or vinyl-backed products.
Coverage and Trowel Options*
1/8" x 1/8" x 1/8"
Flooring: Carpet (polypropylene; woven)
Coverage: 65-75 ft
2
per gallon
1/8" x 1/8" x 1/16"
Flooring: Carpet (polypropylene; woven)
Coverage: 90-110 ft
2
per gallon
3/32" x 3/32" x 3/32"
Flooring: Carpet (non-woven; closed cell; Enhancer
™
)
Coverage: 100-200 ft
2
per gallon
*The trowel notches referenced are those typically recommended for the type of
flooring being installed and are shown as a guide. Consult flooring manufacturer
for their specific trowel recommendations.
Substrates
Concrete, underlayment grade plywood, vinyl composition tile (free of wax)
and terrazzo.
Limitations
• Ensure substrate, flooring material and adhesive are fully acclimated prior
to installation at the same temperature and humidity level expected during
normal use (between 65–95°F) with a relative humidity (RH) of no greater
than 65%. Refer to flooring manufacturer’s specific recommendations and
industry standards.
• Materials and area temperature must be between 65–95°F with a maximum
RH of 65% for 48 hours before and during installation as well as for 72 hours
afterward. Large temperature or humidity increases or decreases can
affect the flooring and performance of the installation.
• Ensure adequate ventilation during flooring installation.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specific recommendations
prior to installation for additional information.
SUPERIOR
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.
M
O
I
S
T
U
R
E
C
O
N
T
R
O
L
U
P
T
O
1
0
L
B
S
.
M
V
E
R
/
9
0
%
R
H