MSDS

ManualsBrandsRoberts ManualsFlooring4002 1-gal. Carpet Pad Glue Adhesive

====================I. PRODUCT IDENTIFICATION==========================

Trade Name: Roberts 4002 Carpet Pad Cement

Chemical names, common names: Synthetic latex/resin blend

Manufacturer's Name: Roberts Consolidated Industries

Address: 300 Cross Plains Blvd.

Dalton, GA 30720

Emergency Phone: (800) 424-9300 (Chemtrec)

Business Phone: 706-277-5294 Date prepared: 12/23/09

By: M. King

HMIS Rating: H = 1 F = 0 R = 0

====================II. HAZARDOUS INGREDIENTS==========================

CAS No. % by wt. PEL TLV

No Reportable Hazardous Ingredients.

Reportable hazardous chemicals for SARA TITLE III Section 311, 312, 313:

None.

===================III. PHYSICAL PROPERTIES ============================

Vapor Density (Air=1): Greater than 1 Boiling Point: 212F

Solubility in Water: Miscible Specific gravity: 1.2

Vapor Pressure (mmHg at 20c): Same as water pH: 9 - 10

Evaporation rate (nBuAc=1): Same as water

Appearance & odor: Beige, thick syrup, very mild resinous odor.

VOC: So low as to be indeterminate.

===================IV. FIRE AND EXPLOSION==============================

Flash point, Pensky-Martens C.C: NA

Auto-Ignition Temperature, F: NA

Flammable limits in air, Volume %: Lower: Not Applicable Upper: NA

Fire Extinguishing Materials:

__X

__Water Spray __X__Carbon Dioxide _____Other:

__X__Foam __X__Dry Chemical

Special Fire fighting Procedures: Wear self-contained breathing

apparatus.

Unusual Fire and Explosion Hazards: None known

=========================================================================

Summary of content (4 pages)

PAGE 1
====================I. PRODUCT IDENTIFICATION========================== Trade Name: Roberts 4002 Carpet Pad Cement Chemical names, common names: Synthetic latex/resin blend Manufacturer's Name: Roberts Consolidated Industries Address: 300 Cross Plains Blvd. Dalton, GA 30720 Emergency Phone: (800) 424-9300 (Chemtrec) Business Phone: 706-277-5294 HMIS Rating: H = 1 F = 0 Date prepared: 12/23/09 By: M. King R = 0 ====================II. HAZARDOUS INGREDIENTS========================== CAS No. % by wt.
PAGE 2
MSDS -Page 2 ======================= V. HEALTH HAZARD INFORMATION ================== SYMPTOMS OF OVEREXPOSURE Inhalation: May cause slight irritation to upper respiratory tract. Eyes: May cause slight irritation. Skin: None known; may cause slight irritation. Ingestion: Not a likely route of entry under proper handling conditions. May cause vomiting. Symptoms may be the same as inhalation.
PAGE 3
------------------------------------------------------------------------MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None Known ===========================VI. REACTIVITY DATA========================== Stability: __X____ Stable _____ Unstable Conditions to Avoid: Protect from freezing. Incompatibility (Materials to Avoid): Oxidizing materials Hazardous Decomposition Products (including combustion products): Oxides of carbon, water and organic compounds of unknown structure.
PAGE 4
===============VIII. SPILL, LEAK, AND DISPOSAL PROCEDURES============= Keep out of sewer systems to prevent blockage due to polymer deposits. Soak up material with absorbent material (sand, sawdust) and place into closed containers for disposal. Note: Dispose of all wastes in accordance with Federal, State and Local regulations. ===================IX. Storage & Handling DATA======================== Other Handling and Storage requirements: Protect against physical damage.