Specification

6700
5. INSTRUCTIONS
Preparation
Subfloors must be structurally sound, dry, smooth, flat (≤ 3/16" within 10'),
level and free of excess moisture/alkali and all substances (oil, wax, grease,
paint, oil based sealers, adhesive residue, etc.) that may inhibit the bond of the
adhesive or the performance of the flooring or its installation.
All substrate cracks, chips, holes, joints, high spots and irregularities must
be adequately repaired. Expansion or other moving joints must not be filled
or covered with flooring. Patching compounds must be suitable for the use
application, cement based and polymer-modified, and applied according to the
manufacturer’s instructions.
Installation
Materials and area temperature must be between 65–95°F with a maximum
RH of 65% for 48 hours before and during installation as well as for 72 hours
afterward. Large temperature or humidity increases or decreases can affect
the flooring and performance of the installation. Lift a corner periodically to
ensure 100% coverage of adhesive to the flooring backing and the substrate to
ensure a void free bond.
Spread adhesive uniformly. Adhesive ridges should be of sufficient height to
achieve full coverage of the substrate and the deepest recesses in the back of
the flooring material.
Place flooring into the adhesive while the adhesive is still fresh. The
amount of time in which you have to place the flooring will vary with
temperature and humidity.
Curing
High temperature and low humidity will cause the adhesive to cure faster.
After installation, restrict foot traffic and moving of heavy objects for 24–48
hours to allow adhesive to cure properly. Premature traffic can cause
installation failure.
Clean-up
Fresh adhesive – warm, soapy water.
Dried adhesive – use mineral spirits sparingly with a clean, white cotton cloth.
DO NOT POUR DIRECTLY ONTO FLOORING.
6. AVAILABILITY
Packaging
4 gallon Plastic Pail (15.14 L) 6700-4 075378670049
1 gallon Plastic Pail (3.78 L) 6700-1 075378670018
1 quart Plastic Pail (946 mL) 6700-0 075378670001
7. WARRANTY
10-Year Direct Bond
Roberts warrants that this product will be free from manufacturing defects
for 12 months from the date of purchase, when applied in accordance with
Roberts’ instructions and industry standards. Roberts’ sole liability is to
either supply new product or refund the original purchase price. This limited
warranty excludes all other express warranties including the warranties
of merchantability for a particular use or purpose. Any implied warranties
arising by operation of law are limited to one year. Roberts will not be liable for
any incidental or consequential damages.
Visit www.robertsconsolidated.com for full warranty details.
8. MAINTENANCE
Not applicable.
9. TECHNICAL SERVICES
For technical assistance or installation questions not covered in this
document, please contact our Technical Services Department at
[phone] or visit robertsconsolidated.com.
10. FILING SYSTEM
Division 9
9853
Roberts
®
, GoldGuard
®
, and the e
®
logo are registered trademarks of Roberts Consolidated Industries, Inc. • Q.E.P.
®
is a registered trademark of Q.E.P. Co., Inc.
‘LEED
®
’ and related logo is a trademark owned by the U.S. Green Building Council • CRI Green Label +Plus
®
is a registered trademark of The Carpet and Rug Institute
Q.E.P. Co., Inc.
1001 Broken Sound Parkway, NW
Boca Raton, FL 33487
www.qepcorporate.com
www.robertsconsolidated.com
Customer Service: [phone]
Technical Assistance: [phone]
Updated: June 15, 2017
®