Instructions / Assembly

Safety Data Sheet

Date: 01/23/2023

SECTION 1: Identification and Company Details

Product Name: Moisture Barricade Polyethylene Underlay Film

Product Code: 70-115 (120 sf roll) & 70-116 (300 sf roll)

Manufacturer/ Supplier: Roberts Consolidated Industries, Inc.

Address: 300 Cross Plains Blvd.

Dalton, GA 30721

Emergency Phone: (800) 424-9300 (24-hour Response / CHEMTREC)

Product Information: (706) 277-5294

Recommended Use: To provide a barrier for moisture protection over cement slabs to protect against moisture for laminate

and engineered wood floors

SECTION 2: Hazard(s) Identification

EMERGENCY OVERVIEW

This product is not classified as hazardous under GHS criteria.

Target Organs: Not available

Hazard Sorts: None

Potential Health Effects:

Ø Eye: No health effects are expected If contact with eyes, may cause eyes discomfort.

Ø Skin: No health effects expected

Ø Ingestion: No health effects expected. No data supports that the material will be absorbed by the digestive system. If

ingested, may cause partial or complete intestinal blockage.

Ø Inhalation: No health effects are expected.

SECTION 3: Composition / Information on Ingredients

Weight % CAS #

Polyethylene >95% 9002-88-4

Inert Ingredients <5%

SECTION 4: First-Aid Measures

Eye Contact: Particulates may scratch eye surfaces/cause mechanical irritation. Seek medical attention if necessary.

Skin Contact: No health effects are expected under normal use. Negligible hazard at ambient temperatures (-18 to +38°

C;0 to 100° F). Exposure to hot material may cause thermal burns.

Inhalation: Inhalation of this material is unlikely. Negligible hazard at ambient temperature (-18 to 38° C; 0 to 100° F)

Vapors and/or aerosols which may be formed at elevated temperatures may be irritating to eyes and

respiratory tract. Low order of toxicity.

Ingestion: Ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure partial

or complete intestinal blockage does not occur. Minimal toxicity.

PAGE 1
Safety Data Sheet SECTION 1: Date: 01/23/2023 Identification and Company Details Product Name: Product Code: Manufacturer/ Supplier: Address: Emergency Phone: Product Information: Recommended Use: SECTION 2: Moisture Barricade Polyethylene Underlay Film 70-115 (120 sf roll) & 70-116 (300 sf roll) Roberts Consolidated Industries, Inc. 300 Cross Plains Blvd.
PAGE 2
SECTION 5: Fire-Fighting Measures This section provides recommendations for fighting a fire caused by the chemical. The required information consists of: FLASHPOINT: 649° F. METHOD: ASTM E136 NOTE: Estimated Minimum FLAMMABLE LIMITS: NOTE: Not applicable AUTOIGNITION TEMPERATURE: 649° F. NOTE: Estimated Minimum GENERAL HAZARD: Solid material, may burn at or above the flashpoint, and airborne dust may explode if ignited. Toxic gases will form upon combustion.
PAGE 3
SECTION 10: Stability and Reactivity Chemical Stability: Stable under normal conditions. Conditions to Avoid: Excessive heat, any source of ignition.
PAGE 4
SECTION 16: Other Information Issue Time: 01/23/2023 Issue Department: Technical department Date review unit: Modification record: Notice to Reader To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user.