SDS
1
Safety Data Sheet
Revision Date: 5/6/2015
SECTION 1: Identification and Company Details
Product Name: 7200 Wall Base Adhesive
Product Code: 7200
Manufacturer/ Supplier: Roberts Consolidated Industries, Inc.
Address: 300 Cross Plains Blvd.
Dalton, GA 30721
Emergency Phone: (800) 424-9300 (24-hour Response / CHEMTREC)
Product Information: (706) 277-5294
Recommended Use: Adhesive
SECTION 2: Hazard(s) Identification
OSHA / HCS Status: This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Classification of the
substance or mixture: SKIN CORROSION / IRRITATION – Category 3
SERIOUS EYE DAMAGE / EYE IRRITATION – Category 2
SKIN SENSITIZATION – Category 1
RESPIRITORY SENSITIZER – Category 1
Signal Word: Danger
Hazard Statements: Causes mild skin irritation.
Causes eye irritation.
Hazard Pictograms:
Precautionary Statements: Read label before use.
Wash hands thoroughly after handling.
Use personal protective equipment as required.
IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy
to do – continue rinsing.
IF exposed or concerned: Get medical advice/attention.
If skin irritation occurs: Get medical advice/attention.
Get medical advice/attention in needed.
Dispose of contents/container in accordance with local authority requirements.
SECTION 3: Composition / Information on Ingredients
Weight % CAS #
Naphtenic Oil 1.9% 64742-52-5
Urea 1.76% 57-13-6
This product is an encapsulated mixture which reduces the likelihood of exposure to hazardous particulates. Airborne exposures to
hazardous dusts or mists may be generated by spraying, sanding or grinding.