Product Brochure

Universal Carpet Seam Sealer
1. PRODUCT NAME
ROBERTS
®
8015 Universal Carpet Seam Sealer
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
ROBERTS 8015 is a universal solvent-free carpet seam sealer developed for
seaming most types of carpets, including vinyl-backed and to prevent edge
raveling. May also be used to repair bubbles in existing installations.
Features and Benefits
• Fast drying, solvent-free formula
• Suitable for all types of carpet, including vinyl-backed carpets
• UV tracers for detection with UV light sources
• Can be used on both direct and double bond installs
• Enviro-Friendly-LEED
®
compliant; VOC < 1 g/L, SCAQMD Rule 1168
• CRI Green Label Plus
®
Certified – GLP #34711
• GoldGuard
®
antimicrobial product protection
Uses
For seaming carpet edges and to prevent edge raveling on polypropylene, jute,
urethane latex and unitary carpets.
This product is not recommended for seaming vinyl flooring.
Coverage
Up to 660 lineal feet per quart
Limitations
• Be careful not to get sealer on carpet nap.
• Ensure adequate ventilation during flooring installation.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specific recommendations
prior to installation for additional information.
4. TECHNICAL DATA
Product Type:
Synthetic Polymer
Color:
White
Odor:
Very mild, non-offensive
Open Time:
Up to 10 minutes
VOC:
< 1 g/L
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing. Does not require thinning.
5. INSTRUCTIONS
Preparation
Ensure substrate, carpet and adhesive are fully acclimated prior to installation
at the same temperature and humidity level expected during normal use
(65–95°F) with <65% relative humidity.
Installation
Prepare/cut carpet edges according to manufacturer’s recommendations.
Apply a 1/8" bead of adhesive to one side of the carpet along the backing and
where the face yarns enter the backing (not the cushion). Smooth out any
excess adhesive. Join the carpet seams while the sealer is still wet.
Bubble Repair
Inject or open and spread this product under isolated bubbles of flooring. Roll
flooring to receive transfer and sandbag overnight.
Curing
Up to 12–24 hours. High temperature and low humidity will cause the adhesive
to cure faster.
Clean-up
Within 10 minutes after seaming carpet use mineral spirits sparingly with a
clean, white cotton cloth.
DO NOT POUR CLEANER DIRECTLY ONTO FLOORING.
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.
8015
SUPERIOR