Specifications

34
MP3 / WMA CD Mode
The Blutune 200 sound system is able to play CD-R and CD-RW discs
containing MP3 and WMA fi les. It is assumed in this section that a fi le is
equivalent to a CD track.
An MP3 / WMA CD may not contain more than 511 fi les and not more than
99 folders. MP3 and WMA fi les should be created with an audio sample
rate of 44.1kHz (this is normal for fi les created from CD audio content).
MP3 and WMA data rates up to 320 kilobits per second are supported.
WMA Lossless, WMA Voice, WMA 10 Professional and fi les which have
DRM protection are not supported.
When burning CD-R and CD-RW discs with audio fi les, various problems
may arise which could lead to problems with playback. Typically such
problems are caused by poor CD writing or audio encoding software, or
by the hardware settings of the PC's CD writer, or by the CD being used.
Should such problems arise, contact the customer services of your CD
writer or software manufacturer or look in their product documentation
for relevant information. When you are making audio CDs, take care
to observe all legal requirements and ensure that the copyright of third
parties is not infringed.
1. To select the CD mode press and release the Mode button until 'CD'
shows on the display, or insert a suitably prepared CD-R or CD-RW
disc.
2. Insert a CD with printed side facing up into the CD slot. The disc will
be loaded automatically. The unit will check the CD type and load
its track list. The display will show 'loading' and then 'reading' as the
information is read.
If there are many fi les or folders on the CD then it may take some
tens of seconds to read all of the fi le and folder names and to identify
those which are playable (with .mp3 or .wma fi lename extension).
1
CD / MP3 / WMA
CD
READING
02 001 01:44
Title:Lazing on