Specifications

Recording MP3 / WMA ﬁ les from CD / SD / USB

In addition to recording from conventional sources, the Blutune 200 sound

system can also record from MP3 or WMA ﬁ les that have previously been

written to CD, SD or USB media. In this case the ﬁ les are copied rather

than re-encoded to MP3 in order to avoid a reduction in quality. You may

copy ﬁ les from CD or SD to USB and from CD or USB to SD.

1. Select the desired source for the recording (SD, USB or CD).

2. Press the Play / Pause button to start playing the source media (if it

does not automatically start). Set the volume to the required listening

level (the volume of the recording will not be affected by this).

3. Insert the media that the ﬁ les will be recorded on to (SD or USB).

4. Press and hold the Record button. The display will show "Record

init...".

5. If only one media type is present, the audio will stop while the source

media is taken back to the beginning of the current ﬁ le. Recording will

then start.

6. If both SD and USB media are detected, then a menu is offered to

allow you to choose between Card and USB recording. Select one or

the other as needed using the Tuning Up or Down buttons and then

press the Select button. The source media will be taken back to the

beginning of the current ﬁ le and recording will then start.

7. In order to stop the recording press and hold the Record button once

more. Recording and playback will stop and all ﬁ les that have been

played will have been copied to the storage media.

4,7

02 001 01:44

Title:Lazing on

02 012 00:00

Record init...

02 001 01:23

REC 0:01:23

Record ending...

SD / USB