Specifications

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough

to give good reception. However, you may wish the Auto-scan function

to also be able to ﬁ nd weaker signals, possibly from more distant radio

transmitters. Your radio includes a local / distant option for the Auto-scan

function.

1. Press and release the On/Standby button to switch on your radio.

2. Repeatedly press and hold the Source button until the FM mode is

selected.

3. Press and release the Menu button. The FM menu will show on the

display.

4. Press and release the Tuning Up or Down buttons until 'Scan setting'

shows on the display. Press and release the Select button. The current

setting will be marked with an asterisk.

5. Press and release the Tuning Up or Down buttons to switch between

'Strong stations only' and 'All stations' options on the display. The

(All stations) option will allow the radio to ﬁ nd weaker signals when

scanning.

6. Press and release the Select button to conﬁ rm your selection. The

radio will then revert to the normal information display. The chosen

setting is stored in the radio and remains in force until changed or

until a System Reset.

Note: The initial setting (out of the box, or after a System Reset) causes

the radio to ignore weaker (or more distant) signals.

2,3

4,5

4,6

<Scan setting

Scan setting

<Strong stations

Scan setting

<All stations