Specifications

19
Alarms
Your clock radio has 2 separate alarms which can be set to wake you to
DAB, FM radio or buzzer alarm. Each alarm can be set to sound once,
daily, on weekdays or at weekends. The alarms can be set whether the
clock radio is on or in standby mode. In the event of a power interruption
your clock radio has a built in memory chip that will maintain your alarm
settings for when the power is restored.
Note: If no buttons are pressed for 10 seconds, the clock radio will exit
the alarm setup.
Setting an alarm
1. Press and release the Alarm button. 'Alarm 1 Setup' will show on the
display. Press and release the Alarm button again to select alarm
number 2 'Alarm 2 Setup' will show on the display.
2. Press the Select button to enter the alarm setup. Alarm status will
fl ash on the display.
3. Press and release the Tuning Up or Down buttons to select On or Off.
If Off is selected any current setting for that alarm will be cancelled.
4. With 'On' selected, press and release the Select button to cause the
alarm hour digits to fl ash on the display.
5. Press and release the Tuning Up or Down buttons to choose the
desired hour for the alarm and then press the Select button to cause
the alarm minute digits to fl ash on the display.
If the clock radio has been set to the 12 hour clock format, there will
also be an option here for setting AM or PM for the alarm time.
1
3-5
3-5
2-5
Alarm 1 Setup
Alarm 1 Wizard
Alarm On
Alarm 1 Wizard
On time
09:00
Alarm 1 Wizard
On time
09:30