Specifications

To return to auto clock set mode

1. Press the On / Standby button to switch on your clock radio.

2. Press and hold the Menu/Info button until the Advanced DAB or FM

menu shows on the display and then release the button.

3. Press the Tuning Up or Down buttons until 'System Setting' appears

on the display. Press and release the Select button.

4. Press the Tuning Up or Down buttons until 'Time' appears on the

display. Press and release the Select button.

5. Press the Tuning Up or Down buttons until 'Auto update' appears on

the display. Press and release the Select button.

6. Press the Tuning Up or Down buttons to choose an update option

from 'Update from Any', 'Update from DAB', Update from FM' or 'No

update' as required. The current update option will be marked with an

asterisk. Press and release the Select button to conﬁ rm your choice.

The clock radio will exit to the previous menu.

Note: If you select 'Update from Any', 'Update from DAB', Update from

FM' the current time received will be displayed. If no signal is found you

should either position the clock radio or its aerial so that a signal can be

received, or revert to manual clock mode (see page 26).

3-6

DAB

System Setting

Time

Auto update

Update from Any

Auto update

Update from DAB