MSDS

Page 2 of 5
5. FIRE-FIGHTING MEASURES
Flash Point: Greater than 232°F (ASTM D3828-07)
Extinguishing Media
Dry chemical, carbon dioxide, foam, water/ water spray.
Hazardous Combustion Products
Carbon dioxide, carbon monoxide, unknown by-products of combustion otherwise no particular hazards known.
Protection of Firefighters
Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions - Wear appropriate respiratory protection. Use personal protective clothing. Ensure adequate
ventilation.
Environmental Precautions - This product is not regulated by RCRA. This product is not regulated by CERCLA
(‘Superfund’).
Clean Up - Spills should be contained, solidified, and placed in suitable containers for disposal.
7. HANDLING AND STORAGE
Handling:
Protection against fire and explosion: No explosion proofing necessary
Storage:
Store protected against freezing and extreme heat.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls - Local exhaust should be used to maintain proper ventilation and air flow.
Personal Protective Equipment
- Respiratory Protection
Normally none required with good mechanical ventilation.
- Skin Protection
Chemical resistant protective gloves (butyl rubber, nitrile rubber, pvc or polyvinyl alcohol).
- Eye/Face Protection
Tightly fitting safety goggles (chemical goggles).
- General Safety and hygiene measures:
Wear protective clothing as necessary to prevent contact. Avoid inhalation of vapors/mists. Wash soiled
clothing immediately.
9. PHYSICAL AND CHEMICAL PROPERTIES