Use and Care Manual

6280
Pressure Sensitive Adhesive
1. PRODUCT NAME
Roberts
®
6280 Pressure Sensitive Adhesive
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
Roberts 6280 is an acrylic pressure sensitive adhesive with good plasticizer
migration resistance. This product may be used as a releasable adhesive or a
permanent adhesive if flooring is installed while adhesive is still wet.
Features and Benefits
• Releasable or permanent installations
• Good plasticizer migration resistance
• Works with a variety of flooring types
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC < 1 g/L,
SCAQMD Rule 1168
• Non-flammable. NFPA Class A and UBC Class 1 fire resistance
ratings (ASTM E84)
• CRI Green Label Plus
®
Certified – GLP #42613
• GoldGuard
®
antimicrobial product protection
• Traffic – Heavy Residential/Moderate Commercial
Uses
For the interior installation of vinyl back carpet tile, commercial carpet
cushion, solid vinyl, fiberglass sheet vinyl, recycled non-foam (PVC) and
Enhancer
®
backed carpet tiles.
Coverage and Trowel Options*
1/16" x 1/16" x 1/16"
Flooring: Carpet Tile
Coverage: 170-190 ft
2
per gallon
Medium Nap Roller
Flooring: Carpet Tile
Coverage: Up to 225 ft
2
per gallon
*The trowel notches referenced are those typically recommended for the type of
flooring being installed and are shown as a guide. Consult flooring manufacturer
for their specific trowel recommendations.
Substrates
Concrete, APA rated plywood and terrazzo.
Limitations
• Ensure substrate, flooring material and adhesive are fully acclimated
prior to installation at the same temperature and humidity level expected
during normal use (between 65–95°F with a relative humidity (RH) of no
greater than 65%).
• Ensure adequate ventilation during flooring installation.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specific recommendations
prior to installation for additional information.
4. TECHNICAL DATA
Product Type:
Acrylic Latex / PSA
Color:
Off-white
Odor:
Very mild, non-offensive
Open Time:
Up to 20 minutes (Permanent Installations)
Working Time:
Up to 24 hours
Tack Time:
Approximately 60 minutes (Releasable Installations)
VOC:
< 1 g/L
MVER:
5 lbs or less (ASTM F1869) / 80% RH or less (ASTM F2170)
pH:
Must not exceed 9.0
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing. Does not require thinning.
PREFERRED
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.