Use and Care Manual

63 00
Pressure Sensitive Adhesive
1. PRODUCT NAME
Roberts
®
6300 Pressure Sensitive Adhesive
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton GA 30721
[phone] / [phone]
3. DESCRIPTION
Roberts 6300 is a high performance pressure sensitive adhesive with
excellent resistance to plasticizer migration and formulated to withstand up to
10 lbs MVER or 90% RH. This product dries quickly and offers a higher shear
strength making it the adhesive of choice for commercial installations where
performance is key.
Features and Benefits
• Moisture Control Adhesive –
Up to 10 lbs MVER (ASTM F1869) / 90% RH (ASTM F2170)
• Persistent tack and high shear strength
• Releasable for ease of replacement of worn areas or permanent bond
• Excellent resistance to plasticizer migration
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC 9.7 g/L,
SCAQMD Rule 1168
• Non-flammable. NFPA Class A and UBC Class 1 fire resistance
ratings (ASTM E84)
• CRI Green Label Plus
®
Certified – GLP #42613
• GoldGuard
®
antimicrobial product protection
• Traffic – Heavy Commercial
Uses
For the interior installation of carpet cushion, solid vinyl, solid rubber, solid
urethane, recycled non-foam (PVC) and Enhancer
®
backed carpet tiles.
Coverage and Trowel Options*
1/16" x 1/16" x 1/16"
Flooring: Carpet Tile
Coverage: 170-190 ft
2
per gallon
Medium Nap Roller
Flooring: Carpet Tile
Coverage: Up to 225 ft
2
per gallon
*The trowel notches referenced are those typically recommended for the type of
flooring being installed and are shown as a guide. Consult flooring manufacturer
for their specific trowel recommendations.
Substrates
Concrete, flooring grade APA rated plywood, vinyl composition tile (free of
wax), primed gypcrete, steel and terrazzo. Vinyl composition tile must be well
bonded and limited to one layer. Do not install over vinyl composition tile in
high or heavy traffic areas.
Limitations
• Ensure substrate, flooring material and adhesive are fully acclimated prior
to installation at the same temperature and humidity level expected during
normal use (between 65–95°F with a relative humidity of no greater than
65%). Maintain these conditions after the installation.
• Foam backed carpet will not provide the releasable feature.
• Ensure adequate ventilation during flooring installation.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specific recommendations
prior to installation for additional information.
4. TECHNICAL DATA
Product Type:
Acrylic Latex
Color:
Off white
Odor:
Very mild, resinous
Open Time:
Up to 20 minutes (Permanent Installations)
Working Time:
Up to 40 minutes
Tack Time:
Up to 45 minutes (Releasable Installations)
VOC:
9.7 g/L
MVER:
10 lbs or less (ASTM F1869) / 90% RH or less (ASTM F2170)
pH:
Must not exceed 10
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing. Does not require thinning.
Superior
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.
M
O
I
S
T
U
R
E
C
O
N
T
R
O
L
U
P
T
O
1
0
L
B
S
.
M
V
E
R
/
9
0
%
R
H