Datasheet

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough

to give good reception. However, you may wish the Auto-scan function

to also be able to ﬁ nd weaker signals, possibly from more distant radio

transmitters. Your radio includes a local / distant option for the Auto-scan

function.

1. Press the On/Off button to switch on your radio.

2. If needed, press the Band button to select the FM band.

3. Press and hold the Info button until the display shows "FM Scan

Zone" then press the Tuning control to enter the scan zone selection

menu.

4. Rotate the Tuning control to switch between Local and Distant options

on the lower line of the display. The Distant option will allow the radio

to ﬁ nd weaker signals when scanning.

5. Press and release the Tuning control to conﬁ rm your selection. The

radio will then revert to the normal information display. The Local or

Distant setting is stored in the radio and remains in force until changed

or until a System Reset.

Note: The initial setting (out of the box, or after a System Reset) causes

the radio to ignore weaker (or more distant) signals.

3-5