Instruction manual

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Information

Entering the network name manually

If you need to enter the wiﬁ network name manually into your radio (if the

SSID is not being broadcast by your router) then please use the following

procedure.

1. From the radios Settings menu, select ' Network' and then 'Enter

network name'.

2. To enter the SSID, characters are selected and entered using the

Tuning Up or Down buttons. As you press the buttons, the radio

scrolls through the available characters. The central character will

be entered when you press the Select button.

Do this as needed until the complete network name has been entered.

The SSID setting is sensitive to upper and lower case characters and

symbols. You must enter it exactly as set up in your router.

Press the 'Back' button to erase a character or key previously

entered

Select 'END' when the SSID is complete

Alternatively the 'END' symbol can be quickly accessed by pressing

the Add/RDS button.

Select 'Back' button to cancel and go back to the DNS settings

screen

3. The clock radio will then try to connect to the named network. The

remainder of the connection procedure should then be followed - see

page 10, step 11.