Instruction manual

63
Factory reset
If you wish to completely reset your radio to its initial state this may be
performed by following this procedure.
1. Access the main menu by pressing the Menu button until the 'Main
menu' option is shown, then select this with the Tuning/Select
control.
2. Rotate the Tuning/Select control until 'System setup' is selected on
the display. Press the control to enter the system setup menu.
3. Rotate the Tuning/Select control until 'Factory Reset' is selected on
the display then press the control. The display will show 'Press INFO
to confirm reset'.
4. Press the
Info button. A full reset will be performed, the station list
together with any preset stations will be erased and your wireless
network connection details will be lost. All configuration settings will
be restored to their defaults, the clock and alarms will be reset.
In case of malfunction for any reason, reset the product as described
above to resume normal operation. It may be necessary in some cases
to disconnect the mains power and remove the batteries, then reconnect
power after 10 seconds.
In case of malfunction due to electrical fast transient (burst), reset the
product as above (reconnection of the power source may be required) to
resume normal operation.
1
1-3
4
WM-202 iss 1.indd 64 20/02/2008 13:04:14