Instruction manual

Battery operation
1. Remove the battery cover on the rear of the unit by pushing the battery
door in slightly and then downwards in the direction of the arrows in
the diagram.
2. Insert six LR20 (D size) alkaline batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with the
correct polarity as shown inside the battery compartment. Replace
the battery cover.
3. Short running time, reduced power, dim display, distortion and
a ‘stuttering’ sound are all signs that the batteries may need
replacing.
4. If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We would recommend for economy that the WM-202 is powered via
the AC adaptor whenever possible with battery operation for occasional
or stand-by use only.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fire or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.
7
1
WM-202 iss 1.indd 8 20/02/2008 13:03:28