Submittal Sheet

E21
GAS OVEN SAFETIES
1710 (TS BODY) GAS CARRIER
The 1710 Series Replacement Body is used with the 1720 Series Replacement Magnet Heads in TS
Automatic Safety Valve applications. Note arrows showing direction of gas flow.
IMPORTANT NOTICE: When a new 1710 replacement body is ordered a new 1720 safety magnet must also
be used. Order separately, see Magnet Heads. Complete assemblies shown below.
ORDERING DATA
INLET AND BODY TYPE CAPACITIES (BTU/HR @ 1" W.C.P.D.)
OUTLET SIZE #11 NATURAL L.P.
1/4" PIPE 1710-110 102,000 165,000
3/8" PIPE 1710-111 128,000 208,000
1/2" PIPE 1710-126 210,000 340,000
3/8" TUBE 1710-113 100,000 165,000
7/16" TUBE 1710-112 106,000 171,000
ORDERING DATA
UNI-LINE #11 BODY TS "J" HEAD
ORDER NO. INLET & OUTLET PILOT INLET & OUTLET O.E.M.
1720-001 1/4" PIPE 1/8" PIPE WOLF 705387-A
1720-002 7/16" TUBE 3/16" TUBE —
1720-003 3/8" PIPE 1/8" PIPE WOLF 15003
1720-004 7/16" TUBE 1/4" TUBE VULCAN 105569-2
1720-005 1/4" PIPE 3/16" TUBE U.S. RANGE 227010SA
WELLS 59011
1720-006* 3/8" PIPE 3/16" TUBE GARLAND 1027000
1720-007 1/2" PIPE 1/4" TUBE GARLAND 1027001
1720-008 1/4" PIPE 1/4" TUBE WOLF 14267 & 714267,
D.C.S. 13002
*No pilot adjustment key.
ORDERING DATA
UNI-LINE
ORDER NO. PILOT SIZE
INLET & OUTLET MODEL – TS "J" HEAD
1720-801 KIT, 1/8" PIPE, 3/16" TUBING,
1/4" TUBING
OUTLET ONLY MODEL – TS "K" HEAD
1720-714 1/8" PIPE
1720-802 KIT, 1/8" PIPE, 3/16" TUBING,
1/4" TUBING
NOTE: The 1720-801 should not be used to replace 1720-802.
The 1720-802 should not be used to replace 1720-801.
BODY TYPE #11
1720
(TS) “J” AND “K”
MAGNET HEADS
The 1720 Series Replacement Magnet Kit is used with 1710 Series Bodies
in TS Automatic Safety Valve applications. All models have FLOW INTER-
RUPTION so that no gas can flow to the main burner while the reset button
is depressed.
1720 Series Kits are designed to replace many individual TS magnet types.
Each magnet head kit is tapped for 1/8" pipe with fittings to adapt to 3/16"
and 1/4" compression tubing. Also included: spring and diaphram compo-
nents, gasket and assembly screws.
1720
(TS11J) COMPLETE MAGNET
AND BODY ASSEMBLY
The TS valve is multi-poise and can be mounted in any position without affecting
its operation. Ambient Temp 32° to 300°F. Maximum Pressure 1/2 PSI (14" W.C.)
RESET BUTTON
PILOT IN
PILOT OUT
THERMOCOUPLE
1720-801
Gasket for "TS" Magnet
1720 Series
ORDER – 10-059
TS-11J