User Guide
Custom Programming
This thermostat can be congured to have 7 Day or 5+1+1 programming. If 7 Day
is selected, all seven days will need to be programmed individually. If 5+1+1
programming is selected, Monday–Friday will be programmed together and
Saturday and Sunday will need to be programmed individually. There are four time
periods for each day (WAKE, LEAVE, RETURN, SLEEP).
Follow the steps below to customize your program schedule:
1.
Select HEAT or COOL. Note: Heat and cool need to be programmed separately.
2. Press MENU (If menu does not appear rst, press RUN SCHED).
3. Press SET SCHED. Note: Monday–Friday (or Monday if in 7 Day mode) will
be displayed and the WAKE icon is shown.
4. Time will be ashing. Use or to make your time selection for the
WAKE time period for Monday–Friday (or Monday if in 7 Day mode).
5. Press NEXT STEP.
6. The set-point temperature will be ashing. Use or to make
your set-point selection for the WAKE time period for Monday–Friday
(or Monday if in 7 Day mode).
PROGRAMMING
9