User Guide

THERMOSTAT OPERATION
1
2
3
LCD Screen
See page 4 for detailed information.
Fan Switch
Select ON or AUTO. ON will run
the fan continuously. AUTO will cycle
the fan on only when the heating or
cooling system is on.
System Switch
Selects HEAT or COOL for your
HVAC system. Selecting HEAT turns
on the heat mode. Selecting COOL
turns on the cool mode. Selecting OFF
turns both heating and cooling off.
Selecting EMH (for heat pumps
with auxiliary heat) will lockout the
compressor andcontrol emergency/
auxiliary heat.
4
5
Temperature Set-Point
Buttons
Press or to select the
desired temperature.
User Buttons
Use these buttons to set up
programming options.
3