Service manual

- 39 -
19) CARBURETOR
Set gasket onto intake manifold and install carburetor.
20) GOVERNOR LEVER
Attach governor rod and rod spring between
governor lever and carburetor throttle lever, and
insert the governor lever to governor lever shaft.
Tighten locking bolt temporarily.
Fig. 5-44
GOVERNOR
LEVER
GOVERNOR SHAFT
ROD SPRING
GOVERNOR ROD THROTTLE LEVER
Tightening Torque : 16.7 - 18.6 N-m
(170 - 190 kg-cm)
(12.3 - 13.7 ft-lb.)