User Manual

16910 CoolTech ID Plus Refrigerant Identifier

Specifications

Sample Parameters Vapor only, oil-free, 300 psig (2 MPa max.)

Detected Compounds R-12, R-134a, R-22, hydrocarbons, air

Sensor Technology Non-Dispersive Infrared (NDIR)

Refrigerant Sample Size 0.3 ounces (8.5 grams) per sample

Refrigerant Loss during Purge Operation Typically 0.4 ounces (11 grams) per minute of

purge time. Refrigerant loss is dependent upon

many factors, such as refrigerant source size,

refrigerant source head space, initial refrigerant

contamination, and final purge limit setting.

Power

Universal 110/220V AC, 50/60 Hz, 0.2 amps max.

Operational Temperature 39° F – 122° F (4° C – 50° C)

SAE1771: If the refrigerant being tested is identified as contaminated, any visual percentages

displayed of CFC-12 (R-12) or HFC-134a (R-134a) outside the design-certified value is informa-

tional and may not be accurate.

SAE CERTIFICATION NOTE: This equipment has not been design-certified for contaminate

detection of R-124 or R142B.