IC1300 Issue: 3 Description: ROBINHOOD IRONING CENTRE Model Number: IC1300 All dimensions in mm Model may vary slightly from images pictured 1 Model pictured: ICI300
Overview Contents of packaging: 1 x Robinhood Ironing Centre 1 x Handle 1 x Installation kit (incl screws, magnetic catch. etc.) 1 x Ironing Board Cover 1 x Door Pre-installation Important: o Please read the entire instructions before installing the Ironing Centre. o Robinhood Ironing Centre can be mounted in two ways: Recessed Mount and Surface Mount. For Surface Mount the addition of a decorative surface mounting collar is recommended (Product Code ICSMK).
Mounting the Ironing Centre SURFACE MOUNT OPTION o Make sure sold timber studs or mounting points are in suitable position for the mounting of the ironing centre. o Due to many different installation possibilities no holes have been provided for these screws, Robinhood suggest making 6 holes of suitable diameter for fixing to the customers preferred location. (it may be necessary to purchase different length screws and/or wall anchors for correct fitting).
Connecting the Ironing Centre to Electric Power o For recessed mount, an external ON/OFF (safety) switch for the Ironing Centre must be installed near the unit. An additional power socket can be installed inside the wall between the switch and power plug. o Alternatively the unit can be hard wired directly to the switch by an electrician. o For surface mount, the Ironing Centres’ plug and lead can be easily plugged into a nearby wall socket, or can be hard wired by an electrician.
Door Assembly Instructions Mounting the Cabinet Door 5. Door may be hinged from either side of the cabinet (illustration is shown for left side hinging). Both sides of the cabinet have pre-punched holes. If hanging the door from the right side, please contact Robinhood customer service for a self adhesive badge to cover the existing screen printed logo. 6. Use the two hinges already fix to the door. 7. Attach the hinges to the cabinet using the screws supplied at the top and bottom section of the cabinet.
Operating Instructions BOARD RETAINER To open the Ironing Board, lift board retainer and lower the board. To store Ironing Board, follow the steps in reverse order. The Ironing Board can swivel 180 degrees and has three working heights, to adjust the board: 1. With the board in the horizontal position hold the board with one hand near the base (NOT BY THE NOSE) and support the pivot rod with the other hand. 2.
Board rotation 3. Make sure the door is clear if the board is to be rotated. 4. With the board in the horizontal position hold the board with both hands (NOT BY THE NOSE) and rotate around the centre pivot the unit will click into the required position. NOTE: In order to store the Ironing board, it must be on its lowest position and rotated back. Lamp Replacement 1. 2. 3. 4. 7 Disconnect Ironing Centre from power supply. Ensure the power is switched off.
Ironing Centre Features The Robinhood Ironing Centre has the following features: o Surface or recess mountable o Heat resistant shelf for iron storage o Integrated cotton coated cover o Right / left hand or no door options o Magnetic door catch opening door o Round corners board o Built in 230-240 volt power outlet o 40 watt light o Utility shelf for spray bottle storage o Auto timer o 3 level height adjustable o Board Swivels a full 180° YOUR IRONING CENTRE BOARD IS FITTED WITH A HEAT RESISTANT COVER.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use. Uniduct – 12 months from date of original purchase for domestic use.
Warranty Certificate (Australia) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use. Uniduct – 12 months from date of original purchase for domestic use.
