User's Manual
Table Of Contents
- Important Safety Instructions
- Electrical Connection
- Appliance Details
- Installation
- Accessories
- Operating Instructions
- Operating Instructions
- Before Using the Oven for the First Time
- Maintenance and Cleaning
- Maintenance and Cleaning
- Troubleshooting
- Warranty Certificate (New Zealand)
- Warranty Certificate (Australia)
4
Installation
The oven should be installed into a purpose built cabinet. Ensure that there is adequate space between the sides of
the oven and the walls of the cabinet for ventilation (see the image below for details).
• Surfaces, synthetic laminates and adhesives used must be heat resistant (100°C minimum), and
neighboring unit fronts up to 70°C.
• Kitchen cabinets must be set level and fixed. A gap of 5mm is required between the oven and surrounding
unit fronts.
• If there is a drawer beneath the oven, a shelf must be installed between oven and drawer.
o Warning: Handles for drawers and cupboards below the oven may become hot during use.
• Slide the oven through the cabinet aperture, align and secure.
• Fix your oven with the 2 screws and washers as indicated in the figure.
Final check
1. Connect the appliance to the mains supply and switch on.
2. Check that the oven functions.