Issue: 1 Description: ROBINHOOD SUPERTUB STANDARD SERIES 3 CONSOLE WITH S/S GOOSENECK TAP Model Number: ST3703 Model pictured: ST3703 All dimensions in mm; Model may vary slightly from images pictured 1
Overview Contents of packaging: 1 x Robinhood Supertub (incl waste system and square brushed stainless steel pole handle) 1 x Installation kit (incl adjustable feet and 3 way ball valves) 1 x Stainless Steel gooseneck tap (incl flexible hoses and mounting nut) Pre-installation Important: o Please read the entire instructions before installing the laundry tub. o Ensure the household pipes are thoroughly flushed to remove debris before connecting your laundry tub to the pipe works.
Installing the Supertub Confirm if the door or washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If needed, please see page 6 of these installation instructions. 1. Fit the four adjustable feet supplied to the bottom of the cabinet and adjust to align with benchtop or washing machine height. Use the lock nut to secure the feet into desired position. Tilt laundry tub slightly to assist with access.
Installing the Supertub cont. 5. Fit the tap ware to the tub using the supplied fittings. Connect the two flexible hoses onto the body of the tap ware from the underside; ensure that the flexible hoses are fitted to the hot and cold correctly. Hand tightened and then finished with a quarter turn only. 6. Position the laundry tub and cut the house waste pipe (which should already be installed) to the exact height. The final height will depend on the waste trap dimensions. 7.
Installing the washing machine water inlet and waste outlet Washing machines hoses 1 2 Some parts are hidden for clarity Operating Instructions Operating the washing machine by adjusting 3 way ball valves 1. To use the washing machine from the mains water supply, simply turn the 3 way ball valves quarter turn valve on. (Shown as above) 2. To isolate the washing machine from the mains water supply, simply turn the 3 way ball valves quarter turn off.
Changing the door from right to left Troubleshooting – Ensure hinge pin is inserted into pilot hole on the door. Installing the handle Please follow below instructions: Changing the washing machine inlet from right to left The washing machine outlet waste hose can be connected to either side of the Robinhood Supertub. 1. On the outside of the laundry tub, remove the screws from the white plastic washing machine waste inlet and the white plastic blanking plate. 2.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Monaco Corporation Limited (“Monaco”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Uniduct – 12 months from date of original purchase for domestic use.