ST3201 Issue: 1 Description: ROBINHOOD SUPERTUB EXTRA LPTAP Model Number: ST3201 All dimensions in mm Model may vary slightly from images pictured 1 Model pictured: ST3201
Overview Contents of packaging: 1 x Robinhood Supertub (incl waste system, plug) 1 x Installation kit (incl feet, 3 way ball valves) 1 x Tap ware (incl flexible hoses, fixing plate, support plate, nuts) Pre-installation Important: o Please read the entire instructions before installing the laundry tub. o Ensure the household pipes are thoroughly flushed to remove debris before connecting your laundry tub to the pipe works.
Installing the Supertub Confirm if the door or washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If they do need to be changed see page 6 of these installation instructions. 1. Fit the four adjustable feet supplied to the bottom of the cabinet and adjust to align with worktop or washing machine height. Use the lock nut to secure the feet into position. Tilt laundry tub slightly to assist with access.
Installing the Supertub cont. 6. Fit the tap ware to the tub using the supplied fittings. Connect the two flexible hoses onto the body of the tap ware from the underside; ensure that the flexible hoses are fitted to the hot and cold correctly. Hand tightened and then finished with a quarter turn only. Hot water hose only 7. Position the laundry tub and cut the house waste pipe (which should already be installed) to the exact height. The final height will depend on the waste trap dimensions. 8.
Installing the washing machine water inlet and waste outlet Some parts are hidden for clarity Cable tie 3 way ball valve 3 way ball valve caps Washing machine hoses Operating Instructions Operating the washing machine taps 1. To use the washing machine from the mains water supply, simply turn the washing machine 3 way ball valves quarter turn valve on. 2. To isolate the washing machine from the mains water supply, simply turn the washing machine 3 way ball valves quarter turn off.
Changing the door from right to left Rotating the Cabinet Door 1. Open the door to its most open position. Unscrew the two screws in the bottom left hand corner. From inside the unit pull the hinge pin downwards to release the door. 2. Manoeuvre the door to allow removal from the Laundry tub. 3. Unscrew the two screws in the top left hand corner. From inside the unit pull the hinge pin upwards. 4. Insert the hinge pin in the bottom right hand location and secure with two screws. 5. Turn door around.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Uniduct – 12 months from date of original purchase for domestic use.
Warranty Certificate (Australia) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use.