ST7001 Issue: 1 Description: ROBINHOOD SUPERTUB DBL DRW Model Number: ST7001 / 7001A Model pictured: ST7001/ST7001A All dimensions in mm Model may vary slightly from images pictured 1
Overview Contents of packaging: 1 x Robinhood Supertub (incl waste system, plug) 1 x Installation kit (incl feet) 1 x Tap ware (incl flexible hoses, support plate, fixing plate, nuts) 2 x Handles, washers and screws. Pre-installation Important: o Please read the entire instructions before installing the laundry tub. o Ensure the household pipes are thoroughly flushed to remove debris before connecting your laundry tub to the pipe works.
Installing the Supertub Confirm if the washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If they do need to be changed see page 6 of these installation instructions. 1. Fit the four adjustable feet supplied to the bottom of the cabinet and adjust to align with worktop or washing machine height. Use the lock nut to secure the feet into position. Tilt laundry tub slightly to assist with access.
Installing the washing machine water inlet and waste outlet Cable tie 3 way ball valve 3 way ball valve caps Washing machine hoses Confirm if the washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If they do need to be changed see page 6 of these installation instructions. 1. Cold water washing machine required, identify cold water 3 way ball valve confirm that the valve is shut horizontal and remove the ¾” cap and seal.
Operating Instructions The tap is operated in conjunction with the graphics printed on the front of the tap handle. Adjusting the height of the drawers and fixing the handles Adjusting the Cabinet Drawers * Maximum draw loading 15kg evenly distributed 1. To adjust the height of individual draws (±2.0mm) simply adjust the position of the screw as shown below. 2. The handles are to be connected to all two drawers of the Robinhood laundry tub. 3.
Changing the washing machine inlet from right to left The washing machine outlet waste hose can be connected to either side of the Robinhood Supertub. 1. On the inside of the laundry tub remove the clip from the white plastic washing machine waste inlet and black flexible hose, move the white plastic part to the other side of the laundry tub 2. Reconnect the washing machine flexible hose to the left hand side replace the clip and confirm that there are no water leaks. 3.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Uniduct – 12 months from date of original purchase for domestic use.
Warranty Certificate (Australia) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use.
