Issue: 1 Description: ROBINHOOD SUPERTUB STANDARD SERIES 3 DRAWER MODEL WITH S/S TAP Model Number: ST7003 Model pictured: ST7003 All dimensions in mm; Model may vary slightly from images pictured 1
Overview Contents of packaging: 1 x Robinhood Supertub (incl waste system and 2 square brushed stainless steel handles) 1 x Installation kit (incl adjustable feet and 3 way ball valves) 1 x Stainless Steel gooseneck tap (incl flexible hoses and mounting nut) Pre-installation Important: o Please read the entire instructions before installing the laundry tub. o Ensure the household pipes are thoroughly flushed to remove debris before connecting your laundry tub to the pipe works.
Installing the Supertub Confirm if the washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If they do need to be changed see page 6 of these installation instructions. 1. Fit the four adjustable feet supplied to the bottom of the cabinet and adjust to align with worktop or washing machine height. Use the lock nut to secure the feet into position. Tilt laundry tub slightly to assist with access.
Installing the washing machine water inlet and waste outlet Washing machines hoses Some parts are hidden for clarity Confirm if the washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If they do need to be changed see page 6 of these installation instructions. 1. Cold water washing machine required, identify cold water 3 way ball valve confirm that the valve is shut horizontal and remove the ¾” cap and seal.
Operating Instructions 1. To use the washing machine from the mains water supply, simply turn the washing machine 3 way ball valves knob quarter turn valve on. 2. To isolate the washing machine from the mains water supply, simply turn the washing machine 3 way ball valves knob quarter turn off. This will isolate the washing machine from the mains water supply but still allow water to flow through the laundry tub tap.
Changing the washing machine inlet from right to left The washing machine outlet waste hose can be connected to either side of the Robinhood Supertub. 1. On the outside of the laundry tub, remove the screws from the white plastic washing machine waste inlet and the white plastic blanking plate. 2. On the inside of the laundry tub, remove the clip from the white plastic washing machine waste inlet and black flexible hose, move the white plastic part to the other side of the laundry tub 3.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Monaco Corporation Limited (“Monaco”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Uniduct – 12 months from date of original purchase for domestic use.
