STSLIM1 Issue: 1 Description: ROBINHOOD SUPERTUB CABINET SLIM Model Number: STSLIM1 All dimensions in mm Model may vary slightly from images pictured 1 Model pictured: STSLIM1
Overview Contents of packaging: 1 x Robinhood Supertub (incl waste system, plug) 1 x Installation kit (incl feet) Pre-installation Important: o Please read the entire instructions before installing the laundry tub. o Ensure the household pipes are thoroughly flushed to remove debris before connecting your laundry tub to the pipe works. To prevent foreign particles damaging the ceramic cartridge an „in-line‟ filter is recommended to be installed prior to the mixer.
Installing the Supertub Confirm if the door or washing machine waste inlet needs to be moved from right to left before securing the unit to the wall. If they do need to be changed see page 6 of these installation instructions. 1. Fit the four adjustable feet supplied to the bottom of the cabinet and adjust to align with worktop or washing machine height. Use the lock nut to secure the feet into position. Tilt laundry tub slightly to assist with access.
Installing the washing machine water inlet and waste outlet Cable tie Washing machine hoses Cleaning and maintenance Powder coated surfaces must not be cleaned with abrasive or chemical cleaners. To keep the Robinhood Supertub looking its best, wipe regularly with a damp soft cloth. A mild soap and water solution may be used to remove stubborn dirt.
Changing the door from right to left Rotating the Cabinet Door 1. Open the door to its most open position. Unscrew the two screws in the bottom left hand corner. From inside the unit pull the hinge pin downwards to release the door. 2. Manoeuvre the door to allow removal from the Laundry tub. 3. Unscrew the two screws in the top left hand corner. From inside the unit pull the hinge pin upwards. 4. Insert the hinge pin in the bottom right hand location and secure with two screws. 5. Turn door around.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Uniduct – 12 months from date of original purchase for domestic use.
Warranty Certificate (Australia) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use.
