Table of Contents Important Safely Instructions noncom P2-P4 About Your Robt V78 Pro Robot. Package Contents Product Diagram Specifications . instructions of Indicator Light Pa Being Your Robt WTS Pro Robot gene PE-PIT Koch Before Use Ra) Preparation Before Use Pio Operation...
© important Safely Instructions To reduce the rig of injury or damage, please kindly read these safely instructions before using, and carefully keep i for further reference. Caution 1.1 Please use this product according to the instructions. Any operation that iz not in accordance with this manual may cause damage io this product 1.
Dangerous 2.1 Do not use the product in an environment with open dames or fragile tams. 2.2 The working temperature range Is -10C S0C, do not use in low temperature or high temperature environment. 2.3 Please do not place the hale, clothes, fingers and other parts of the human body near the openings and moving parts of the product. 2.4 When In suction mode, do not use the product in environment of moisture or with stagnant water. 2.
Caution 4.1 Before cleaning and maintaining the product, be sure to unplug it from the power outlet and tum off the power switch. 4.2 Da not allow the robot to inhale liquids such as water, otherwise the product may be damaged. 4.3 Do not the battery of this machine without permission 4.4 Please clean up the tangled hair on the universal whee! and side brush in time. 4.
# About Your V78 Pro Robot Vacuum Cleanser Package Contents a Adapter 1 Cleaning Brush x 4 User Manual Veo! { IS Py Side Brushes x 4 Filter x 1
Product Diagram Host Chart infrared grant bumper Electrodes contact ping Side brush Hortatory cover oi Dust suction port Fight driving whee! A Speaker Primary filter rr Duse collector Very fine filter woo = oan pre Dust collator Spring contacts
m Using Your V78 Pro Robot Note Before Use * Remove power cords and small objects from the floor that may entangle the robot. «The robot can cross the floor of Inchon/ 15mm heights and 18° inclination, but not suitable for long-pile carpet. tis recommended to use on floor, tile and thin carpet. (Thinner than 0 inch/ 0.8mm) @ Neap the robot away from space lower than 2. inch/ 80mm to prevent it from getting stuck. #Y78 Pro robot has anti-drop sensors fo prevent i from falling down from heights.
Preparation Before Use Place the Charging Base Place the charging base on a hard, level surface and against the wall Remove objects within 3/7 1m of the eft and right side and within 8 2m of tha front charging bees {As the picture shows) Automatic charging «When battery Is low power, robot automatically switches to reluctant to charger mode and get back to the charging base to recharge itself. «Press the @ button on remits control, and then the robot can also bs sent back to the charging bass.
Anus! charging Tum on the power switch on the side of the robot, and the buttons indicator on the robot flashes off). Connect the power adapter to the wall outlet, and the other side of the DC power connects to the robot{As picture shows). «When charging for the first time, please charge the robot for 12 hours. it shows breathing prangs in the process of charging, and solid green once fully charged.
Re mole control 1. Standby ® Press this button, robot starts inactive state, and press [B1] to activate the throat (If there is no operation for 2 minutes, the robot will automatically starts inactive safe. 2. Auto Cleaning am) Press this button, robot stars auto craning, press 30) to stop cleaning. 3. Back to charge @ Frogs this button, robot back to fhe charging base automatically. 4. Start! Pause (3) Press this button to pause the working robot.
B Operation Start cleaning Harass) on robot or (3 on the remote control’ to start auto cleaning mods. Slop working Press the button of robot or (5 on remote control to stop cleaning. #[the product is not used for = long time, please remove the battery and store it in proper place. in case of battery leakage, epees remove the battery and wipe the battery {ill clean. «The battery capacity may decrease when it is deeply discharged or not used for a long time. Activation Is recommended.
Cleaning Mode Auto Cleaning Mode Auto cleaning mods is the most commonly used mode, which Is intelligent programming cleaning mode and adopt smart © G3 shape” cleaning way. To start auto cleaning mode, press the [FF mode bunion on the remote astral. Press start-stop bullion of robot or 5) bunion on remote control to stop working. Spot Cleaning Mode Spot cleaning mode is suitable for a specific area of dust or dirt. In this made, robot cleans the ares in a spiral patter.
Edge Cleaning Mode In this mode, robot will clean along the edges and comers of the room. (After cleaning finishes, robot back to charging base.) Press [23 on the remote control fo star edge cleaning mode. Hack to Charge Mode Press the @& button on reals control or robot's start-stop bunion for 3 absconds, robot will automatically return lo charging base. Reservation Sating Comes with "Reservation” function for says dealing.
Aim the remote control #t the appliance for the Reservation setting (Make sure the prows switch on the side is on.) Press (8 on the remote control to enter the reservation mode, press the direction key to set the specific cleaning ime. The remote control adopts 24-hour formal. Make sure the green light of (Eli constantly on and now the appliance has entered the wale state. if the appliance is not awakened, quickly press or [8] on the cremate control to wake up the appliance. 1.
2. Time Reservation ae The reservation $me san be adjusted with Quickly prods thane, The icon[E) wil ba the direction key. displayed on the screen and Is shes on the clock zone. The reservation time is set. Press Ein BEVEL You can hear the prompt phone. Cleaning reservation is sel. The appliance wi automatically do the dealing according to the selling time pate # I the prows switch ls off, the reservation will be canceled]. You need fo reset 3.
® Cleaning and Maintenance Rubik Part Care Frequency Enslavement Frequency Dust Collator After such use Filter {nos par Wiesel Every 2 months Brushes Once par week Every 6 12 months Side Brushes Cre par two weeks Every 2-8 months Han nor Res par month Universal Whee Once par month Charging Base Lines per month Note: Rob provides various robot vacuum caner replacement parts, If you want io purchase or have any questions regarding emplacement parts, please contact our Amazon servos team or CUSTOM Cans LBA Cle
Remove the filter, gently pat it to clean the dust. (Notice: Dio not clean the HEAP with water to prevent from weakening the filtering performance.) Rinse the dust collector and primary filter. Completely dry the dust collector and primary filter before re-installing. Clean Side Brushes Remove the side brushes and clean | with a cleaning sloth.
Clean Downward Sensor Clean downward sensor with cleaning brush or dry cloth. Clean Dust Suction Port Clean dust suction port with cleaning brush or dry cloth. Clan electrode contact pins and charging base with cleaning brush ar dry cloth.
# Trouble Shooting Error Tone Cause Solution The charging base is unplugged which robot Plug In the charging bees power on Tha charging contact doses “Fhe robot nat ly connect with nib fia Shepherding contact carnal chars charging contact pin Actuate thw salary, Lisa ho pacer augur 65 charge fs robot directly, mistrial put fa bot an charging an teary a | rent mine tor, pant his operation 3 fms, and then i an charge Bg Robot stops Gatling stuck by an cassia's | Remove the obstacles cleaning suddenly Bailey i
When the robot is In abnormal state, the host button is solid red or breathing rad, accompanied by different voice alarms.
a Rob Customer Care Ultra-long Warranty Promise from Robt i-day money back guarantees for ANY reason for 30 days after the date of purchase. Re fum your undamaged Robt product and receive a full refund for ANY reason, 12-Month Limited Product Womanly for quality-related issues. For 12 months after the date of purchase, we deal with all quality related issues with a replacement or a limited refund. Warm Tip: Be sure to uss your product as directed.
