Operation Manual

D 630 V1112 43
NederlandsFrançaisEnglishDeutsch
Technical Specications
Voltage V 400 / 230
Motor power kW 5,5 option 7,5 and 11
Motor power up and down table kW 0,55
Motor power feeding kW 0,75
Weight kg 950
Total weight machine crated kg 1100
Dimensions machine crate LxWxH mm 1590x1340x1235
Diameter cutter block mm 120
Knives 4
Dimensions knives mm 630x30x3
Cutter block speed RPM 5200
Maximum chip removal single pass mm 8
Serrated infeed roller 1, diameter 70 mm
Outfeed rollers 2, diameter 70 mm
Sectional infeed roller 1 OPTION
Rubber rollers 2 OPTION
Chip breakers and pressures (hold down) on both in-and outfeed standard
TERSA cutter block, reversible knives OPTION
Dimensions thicknesser table mm 630x1160
Thicknesser capacity mm 300
Variable feeding speed by frequenty variator m/min from 5 to 22 m/min.
standard
Friction reduction rolls in the thicknesser table 1 or 2 OPTION
Digital read-out thicknesser standard
Rise and fall thicknesser table 2 speeds slow/fast standard
Safety micro switch on hood standard
Dust suction outlet mm 160
Machine CE standard
3 V-belt main motor drive system standard
Double drive chains and sprockets on all arbors and chain tensioners standard
Double bearings on main cutter block, and in-and outfeed rollers standard
Magnetic knive setter standard
Thicknesser table extension, with automatic height drive system OPTION
Automatic “Star-Delta” starter for 7,5 kW and 11 kW motor OPTION