Operation Manual

E300 / E 2800 V0913 1
EnglishDeutsch
Contents
CE Declaration 2
Important instructions when ordering spare parts 3
Safety and maintenance instructions 3
Prohibited use 4
Operating instructions 4
Explanation of accoustic levels 6
General dimensions E-300 6
Technical Data 7
General dimensions E-2800 7
Transportation of the machine 8
Electrical connection 9
Starting up the machine 10
Mounting of the E300 sliding table 10
Mounting of the E-2800 sliding table on the machine 11
Changing main sawblade and scorer sawblade 12
Use and adjustment of the riving knife 13
Settings of main and scorer sawblades 14
Operating the E-300 sliding table 15
Operating the E-2800 sliding table 16
Mounting of the cross-cut table 17
Mounting of the 90° cross-cut fence 17
Calibration of the scale on the cross-cut fence 18
Mitre fence 18
Use of the parallel fence 19
Calibration of the scale on the parallel fence 20
Sawguard 20
Belt tension 21
Problems: causes and solutions 22
Maintenance of the machine 22
Option A5811 Digital read-out of the parallel fence 23
Adjusting the brake on the saw motor 24
Electrical components spares list 25