Operation Manual

8 V0913 E 300 / E 2800
English Deutsch
Transportation of the machine (Fig.1-2-3)
The machine is received in a crate made of heavy duty particle board panels, which can be easily
recycled.
By using hoist equipment the machine can now be lifted with a small crane of forklift truck,
but severe jolts must be avoided (g.1)
When the machine is placed on the ground, it is still possible to move it by removing the front cover
plate and placing a hand pallet truck in the two openings in the front of the frame (2).
The machine must be leveled in both directions to assure good sliding motion of the sliding table.
Four leveling bolts must be put in before the machine is placed on the oor : one bolt in each corner
of the frame (g.3)
If possible, the machine must be placed on rubber plates which act as shock absorbers and reduce the
noise level.
Fig.1
Fig.2
Fig.3