Operation Manual

Types of tools
Cutter blocks and toolholders with interchangeable knives are frequently used when
moulding. The cutter blocks can be made in 1 piece, the cutting part being fitted in a body of
hard steel, mostly chromium steel.
The toolholders consist of the part on which the knives are fitted mechanically. Their cutting
part is made out of hard-metal (HSS) or carbide (K), as is the case for the cutter blocks.
Circular saw
The use of saw blades in hard-metal (HSS) is strictly forbidden. Always use carbide-tipped
(K) saw blades
Planer-thicknesser
The most frequently used planer knives are carbide (K) or hardmetal blades (HSS).
Mortiser
Only use "left" drills on the mortiser. To avoid vibrations short drills should be used as often
as possible.
Only tools according the EN- 847-1 Specification may be used on the machine
8