Operation Manual

NX SERIES V0913 25
– English
Adjusting the riving knife (g. 8)
The saw is equipped with a riving knife suitable for saw blade diameters of 200 and 250 mm.
Always set the riving knife (1) close to the saw blade so that the gap never exceeds 4 mm. The riving
knife can be set in line with the saw blade by using the bolt (1) and the 3 adjustment screws (2). The
bolt only moves the riving knife longitudinally. The 3 adjustment screws (2) the riving aligns with the
saw blade.
Fig.8
Saw hood (g. 9)
The saw hood, delivered with the machine, is adjusted to the saw blades with a diameter of 200 mm
and 250 mm or 315 mm and can be mounted without extra tools. Using the handle (1), the saw cap
can be locked in any position.
Fig.9
1
the bolt
adjustment screws