Operation Manual

26 V0913 NX SERIES

– English

Tilting, rise and fall of the saw blade

1 By turning the hand wheel, the saw blade can be raised or lowered above or beneath the saw

table.

2 For tilting the saw blade, put the crank handle as shown in the ﬁgure.

Fig.9 bis

Saw guide (g. 10)

1 The saw guide is mounted on the cross-cut fence by means of 2 quick release handles (3).

2 This saw guide can be moved along the scale bar and can be secured by pushing the locking

handle (2) down.

3 The saw guide has T-grooves on 2 sides, which allows a high or low position.

4 Adjust the height of the saw blade, in accordance with the thickness of the piece.

5 If possible, mount the guide, according to the height of the piece, vertically or horizontally and

pull it back to the height of the riving knife.

6 Lock the guide with the handles (3)

7 The wanted cut can be read of the scale bar

8 For small cuts and cuts with tilted saw blade, the saw guide can be tilted to the low position thus

avoiding sawing the saw guide, when making thin cuts.

WARNING:

for narrow cuts along the saw fence always use a push stick!

Fig.10