Operation Manual

– English – Deutsch
NZ3200 - AXIS ERGO V1110 1
Index
General Information 2
Important instructions when ordering spare parts 3
Attention 3
Safety and maintenance instructions 3
Danger List 3
Operating instructions 4
Normal and prohibited use 5
Explanation of acoustic levels 6
General Dimensions 6
Technical Data 7
Transportation of the machines 8
Electrical Connection 9
Mounting of the sliding table 9
Starting up the machine 10
Changing main sawblade and scorer sawblade 11
Use and adjustment of the riving knife 12
Lower sawblade cover 12
Adjusting the main sawblade and scorerblade 13
Mounting of the cross-cut table 15
Mounting of the cross-cut fence 15
Adjusting the cross-cut fence 16
Mitre fence 17
Use of the parallel fence 17
Calibration of the scale on the parallel fence 18
Mounting of the roller support 18
Using the sawguard 19
RPM indicator lights 20
Belt tension and speed changing 20
Maintenance of the machine 21
Problems: causes and solutions 21
Electrical components spares list 22
Option A5216 - Retro-t digital read-out for parallel fence 23
Option A5218 - Digital ip Stop on the cross-cut fence 25
Manual Axis Ergo 26
Electrical Diagrams 51
Exploded views 55