Operation Manual

– English – Deutsch
NZ3200 - AXIS ERGO V1110 29
PROCEDURE TO CHANGE THE LANGUAGE
USING THE SAW LIST
Press MENU to change the
language.
Press MENU.
Press the number of the
desired position (1). This value
will appear on the screen (2).
After this appearance, you can
press start and the guide will
move to its position.
Press the ag to change the
language.
Press Z LIJST (saw list).
Remark: when the
measurement is less than
150mm, you are entering
the safety zone. You’ll have
to press the warning triangle
continuously till reaching the
position. To leave this screen
press enter.
Press the language you need
and conrm with enter.
Press the numerical eld
and enter the desired
measurements.