Operation Manual

18 V0212 HX SERIES

– English

– Deutsch

Saw hood (g. 9)

The saw hood, delivered with the machine, is adjusted to the saw blades with a diameter of 200 mm

and 250 mm or 315 mm and can be mounted without extra tools. Using the handle (1), the saw cap

can be locked in any position.

Fig.9

Tilting, rise and fall of the saw blade

(g. 9 bis)

1 The handle (1) can be loosened by turning it ½ turn to the left. Then the saw blade can be raised

or lowered either by pushing the handle down or pulling it up. To lock the height, turn the handle

to the right (clockwise).

2 After loosening the locking handle (3), the saw blade can be tilted from 90° to 45° by turning the

cranck handle (2) After setting the saw blade, always lock the handle.

Fig.9 bis

1 2