Operation Manual

HX SERIES V0212 27

– English – Deutsch

Tenoning guard option A4375

and tenoning table option A4276 (g.23)

1 For tenoning, a special guard is mounted on the table.

2 This guard allows tools up to 250 mm diameter.

3 The hood (1) is ﬁxed to the table with two 2 clamp screws (1)

4 The front cover plate (3) is adjustable in height with 2 knobs (2) at the top of the hood.

5 When tools up to 220 or 250 mm diameter are used, the speed of the spindle arbour has to be

3000 T/min.

Fig.23

tenoning table

Option A4376